Order by 2 PM EST for Same Day Shipping
FREE SHIPPING on all Packaging Supplies Orders. - On Medical Orders over $149.99


  • Should Protective Clothing Be Disposable or Re-Usable?

    Disposable protective clothing is an imperative safety essential in controlled environments such as laboratories, clean rooms, etc. that demand extreme hygiene or can cause worker injuries.

    Selecting between disposable and re-usable protective clothing depends not just on cost but on a variety of other factors.

    Disposable safety supplies


    An important benefit of disposable safety supplies including the clothing is affordability. However, it is necessary to weigh the overall lifecycle costs to make a decision. It includes energy, environmental and transportation costs. Re-usable clothing costs more due to the high cost of laundering and sterilization process. It is also known to gradually diminish the comfort and its ability to protect from contamination.


    Health and safety is another important consideration when weighing the benefits of disposable and re-usable protective clothing. Employee health must be a primary concern when bacteriological and hazardous risks are involved. This applies to both the employee’s health as well as safeguarding products from contamination which may in turn affect the health of end-users. Studies revealed that the protective barrier of clothing diminishes with each cycle. Therefore, it should be inspected physically and tested for repellency.


    Disposable protective clothing such as disposable coveralls, disposable oversleeves, bouffant caps, beard covers, etc. emits less energy and CO2 as compared to re-usable protective clothing. In addition, many other environmental factors such as significant water costs, energy costs, water and detergent required, re-packaging, etc. must be considered.


    The re-usable protective clothing is considered better than the disposable ones as the latter did not offer much comfort. However, the modern disposable safety wear are made from breathable materials and are lightweight enough. Also, some of the laundered materials are reported to retain moisture which might hamper the protective nature of the reusable garment.

    It is important to mention that the appearance and comfort of the reusable clothing suffers after repeated decontamination cycles.


    The cost of disposable work wear provides better flexibility in case where high amount of change around of workers is witnessed. These are easy to store and dispose while do not require any maintenance.

    When it comes to choosing between the two, often disposable protective clothing is more preferred due to a number of factors on analyzing the complete life cycle cost. Disposable garments are much affordable and versatile determining the use of these safety essentials in almost every industry where employees need to wear protective clothing and where there are several visitors.

  • How to Select a Portable Shrink Wrap Machine

    Shrink wraps are undoubtedly the most commonly used packaging materials conforming to their packaging-friendly, cost-effective features. Unlike those heavily sized shrink wrap machines used at industrial settings, portable shrink wrap machines have been trending as these are handy and can be readily used to apply the wraps professionally.

    Portable Shrink Wrap

    Let’s have a look at the details of portable shrink wrap machines:


    Impulse sealers resemble a stapler and are the most commonly used portable machines. Its top sealing bar is raised and lowered so that the sealing bar engages the wire and a perfect seal is created by applying heat to the shrink wrap. After the seal is created, heat is applied to the film by the help of heat gun. Due to heat, the film shrinks thereby conforming it to the product size. Both the sealer and gun require 110V power supply.

    This sealer and gun combo can be used to seal 100-200 products daily with this machine. These weigh light enough to be able to carry from place to place.


    I-Bar system is an all-in-one shrink wrap system. The machine includes a sealer, a heat gun, a film rack and separator, and a film roll. Here, it is important to note that a smaller sealing bar must be chosen to ensure portability of the machine. For example, the portable 13” I-Bar system has 20” x 12” x 17” dimensions with the heat gun rack while the 40” I-Bar system (47” x 12” x 17”) is majorly suitable for single-site use. All the I-Bar shrink wrap systems require 110V power source. The 13” & 18” I-Bar systems can conveniently be placed on a cart or on the backseat of a car.


    The L-Bar sealers are just perfect shrink-wrapping machine for small products. The 13” x 13” L-Bar sealers weigh lesser than 35 lbs. and can easily be used with a heat gun or shrink tunnel.

    An added advantage of the L-Bar sealers over the above two machines is that these can fully seal the open ends of a centerfold shrink film. These sealers are 23” long x 19.5” wide x 6.5” tall and can easily be placed on a small tabletop.

    In the first place you need to decide whether you require shrink wraps or stretch wraps. Shrink wraps are ideal choice for protecting a single product against dust and other atmospheric contaminations. They are also used to bundle disposable food containers and disposable cutlery sets tightly.

    Stretch wraps help palletizing huge loads while protecting the goods from dust, dirt, moisture and other contaminations. Stretch films are available in a wide variety of types including anti-static stretch films, UV stretch wrap, pre-stretched and colored stretch films. If you are looking for wraps that can hold heavy items together to prevent spillage during transit, you need to surely opt for stretch wraps.

  • Let’s Wrap! The stability of Coreless Stretch Wrap

    Coreless Stretch Wrap is a proven commodity designed for industrial shipping tasks. What makes it effective is the high level of load holding stability and strength it provides. A common stretch wrap material used in making Coreless hand stretch wrap is LLDPE (linear low-density polyethylene). It gives rise to stretch film characteristics in regards to elongation due to puncture resistance and break qualities. Most Coreless Stretch Wrap films offer a 500% stretch feature up to the breakage point while standard versions only supply on average 300% maximum when in use. After it is stretched, the elastic recovery ability will keep the load tightly secured.

    Green Wrap / Coreless Stretch Wrap available at Packaging Supplies By Mail Green Wrap / Coreless Stretch Wrap

    The technology that makes this separate from standard cast and blown wraps is its folded edge characteristic. Moreover, this characteristic that is provided through Coreless Stretch Wrap functions in a reinforced manner regarding manual application, so that users are able to receive a high load stability to secure there pallets and bundles. There is no other wrap product on the market that will offer machine like palletizing sustainability like this wrap.

    One of the most beneficial aspects of Coreless Stretch Wrap is also the elimination of core disposal. Core disposal is always an added expense to companies, especially large shipping and manufacturing companies who use a lot of stretch wrap. Although many companies attempt to recycle old cores through resale and bale options, it still remains a labor cost expense to do so. We at PackagingsSuppliesByMail.Com are the premier provider of top performing Coreless Stretch Wrap and you’ll notice that our prices are some of the lowest on the market, if not the lowest. Our Coreless Stretch Wrap is simply the best you’ll find online and beyond. Why? Well Coreless Stretch Wrap is the packaging industry’s new innovative component for its upgraded technological characteristics. Not talking in terms as if it’s a computer or something, but you will experience a major improvement to your manual palletizing and bundling procedures through the use of this wrap.

3 Item(s)

My Cart

You have no items in your shopping cart.