1-800-456-2467
Order by 2 PM EST for Same Day Shipping
FREE SHIPPING on all Packaging Supplies Orders. - On Medical Orders over $149.99

Industrial gloves

  • Hand Safety Basics for an Industrial Workplace

    Hand injuries are the second most commonly observed workplace hazard. According to the research conducted by the American Society of Safety in 2015 that involved a survey with 400 professionals, two out of five workplace injuries are hand injuries resulting from cuts and abrasions. Hand injuries can be costly for industries, as they cause loss of man hours as well as employee compensation if the company provides insurance facility.

    Therefore, it is necessary to understand certain basics related to hand injuries. Most of the injuries happen in oil, gas, construction, and manufacturing industries. It is possible to prevent injuries that can be sustained at home and in the workplace.

    Industrial Gloves

    These 5 basic steps can be easily implemented in a hand safety program:

    1. Ensure awareness among workers.

    Workers need to be constantly alert during work. For a routine task, it is quite possible that one becomes complacent and less aware of the occupational hazards around them. It may be a hammer, knife or chemicals they use. Staying aware, not only hand-related, but other injuries can be prevented.

    1. Minimize exposure to hazards in the workplace.

    Job hazard analysis is a simple way to ensure a smaller number of accidents in the workplace. It can be worked out by identifying key areas where there is possibility of accidents and working out to eliminate those hazards by installing guards, modifying and isolating hazards. You can start looking for personal protective equipment like industrial gloves and disposable oversleeves to prevent any potential hazards.

    1. Mandate using industrial gloves during working hours.

    Although it is not possible to eliminate all job hazards, we could minimize the risk by wearing hand safety gear such as protective gloves. However, safety engineers must ensure choosing the right safety gloves based on the type of job and workplace conditions as improper selection may lead to more dangerous results. For example, wearing cut-resistant gloves to accomplish electrical tasks may prove risky and disastrous.

    1. Train your workers on the use of hand protections

    Once you are done with the selection of hand protections, it is important to train workers on proper procedures to prevent workplace injuries. The training should focus on using the equipment, its limitations and proper use of safety gloves. Also, basic information of which type of glove suffices which kind of protection must be provided.

    Employees must also be aware of the signs of their gloves being damaged and when they require replacement.

    1. Ensure proper care of the gloves

    Gloves must be stored and disposed in a proper way to be able to serve their purpose well. This is an important step as it improper care of the gloves may also lead to injuries.

  • Become Eco-friendly and Safe with Nitrile Gloves

    Various laws and awareness campaigns all over the world with regards to work place safety have played a huge role in making work environments all over the world a lot less dangerous and a more safe.

    Disposable gloves get a major share of the credit in the increase in workplace safety industries, businesses and manufacturing plants. Most of these gloves are manufactured using latex, making these gloves more acceptable and easy to produce, but a significant number of people are allergic to latex made products and can develop rashes on the skin.

    Blue Nitrile Disposable Gloves

    To fight the issue of latex allergies, synthetic rubber is used to manufacture disposable gloves. To further protect from powder based allergies, these gloves are produced and sold without any powder and/or proteins inside the gloves. The strength of the gloves is an extremely important feature for the safety, because users rely on its strength when working in hazardous situations.

    Nitrile is the name of an extremely strong synthetic rubber made from two chemicals called - Butadiene and Acrylonitrile. The rubber made from the above mentioned chemicals is resistant to a wide range of chemicals that a person may handle working in an industry or a manufacturing plant, like petroleum jelly, liquid paraffin, xylene, oils, greases, and even certain solvents.

    Nitrile gloves have strong cuffs with a beaded design and are soft, supple. These gloves are blue in color and known as Blue Nitrile Gloves. These gloves are stronger than the normal latex made disposal gloves and are resistant to oil and chemical permeation.

    PackagingSuppliesByMail.com is a leading supplier of a wide range of a packaging related supplies online, including nitrile disposable gloves, available in various sizes and thicknesses, are a part of the wide inventory. Visit PackagingSuppliesByMail.com for best quality safety accessories including nitrile gloves, and make sure that all your employees are safe and your business is a safe workplace.

  • How Occupational Safety, Protection and Industrial Gloves Work Together

    Safety norms at any workplace must always be defined to ensure security of the entire workforce. Occupation safety aims to maintain and promote the social and physical well- being of employees. There are various industries like the health and wellness, and food and beverage industry which extensively use industrial gloves to protect hands from any bacteria, which may cause health concerns.

    The Safety and Health Executives are independent regulators, with power to legally punish workers or companies for putting others in danger. The HSE also helps businesses on how the use of Personal Protective Equipment like protective clothing, goggles and industrial work gloves are helpful.

    Industrial Gloves

    Substance Exposure & Protection 

    Protection from substance contact is most effectively and reliably achieved by designing the operating processes to avoid contact with harmful substances. Use of hand protection gloves is a major factor in protection. Industrial safety gloves are not as effective as other control measure but are still important when avoiding substance contact.

    Selecting Appropriate Industrial Gloves 

    Hand protection gloves come in special sizes, designs, materials, density, and thicknesses. Choosing the appropriate kind of gloves is very important. Consider these important five factors to make the right decision:

    1. Identify the substances which require handling.
    2. Consider all other work hazards.
    3. Consider the duration of the contact with substances.
    4. Consider the user’s comfort.
    5. Identify various tasks which need use ofhand gloves.

    There are two types of substances used in products, both of which may cause harm if come in contact:

    • Substances created by the production process.
    • Natural substances.

    Sometimes, product labels carry information with regards tothe kind of industrial gloves being used. Hand protection glove manufacturers have charts with performance related information.

    Three key terms used by manufacturers are:

    • Breakthrough time: The time taken by these chemicals to pass through the glove material.
    • Permeation rate: The quantity of all chemical substances that go by the glove and reach the skin.
    • Degradation: Certain materialcan cause industrial gloves to get softer, harder, or even swell sometimes. The higher the ratings, the betterthe material.

    Other hazards like the risks of abrasion, cuts and punctures, high temperatures and allergies exist, and are prominent enough to be taken into consideration while choosing hand protection gloves.

    Industrial gloves must not hamper the tasks from being performed. Oily and wet objects should be handled with textured gloves.Thecomfort of gloves directly affects the productivity based on the duration of its usage.

    Safety should always be a top priority.

3 Item(s)

My Cart

You have no items in your shopping cart.